| -Prev | -Chapter 7. Kernel Documentation | -Next - | -
|---|
-
Tcl procedures: /packages/acs-kernel/10-database-procs.tcl
Tcl initialization: /packages/acs-kernel/database-init.tcl
+
Tcl procedures: /packages/acs-kernel/10-database-procs.tcl
Tcl initialization: /packages/acs-kernel/database-init.tcl
One of OpenACS's great strengths is that code written for it is very close to the database. It is very easy to interact with the database from anywhere within OpenACS. Our goal is to develop a coherent API for database access which makes this even easier. -
-There were four significant problems with the way OpenACS previously used the -database (i.e., directly through the ns_db interface):
--Handle management. We required code to pass database +
There were four significant problems with the way OpenACS previously used the +database (i.e., directly through the ns_db interface):
Handle management. We required code to pass database handles around, and for routines which needed to perform database access but didn't receive a database handle as input, it was difficult to know from which of the three "magic pools" (main, subquery, and log) to allocate a new handle. -
-Nested transactions. In our Oracle driver, begin +
Nested transactions. In our Oracle driver, begin transaction really means "turn auto-commit mode off" and end transaction means "commit the current transaction and turn auto-commit mode on." Thus if transactional code needed to call a routine which needed to operate transactionally, the semantics were -non-obvious. Consider:
-+non-obvious. Consider:proc foo { db args } { db_transaction { @@ -74,8 +37,7 @@ db_dml unused "insert into greeble(bork) values(50)" } --+
This would insert greeble #33 and do all the stuff in foo transactionally, but the end transaction in foo would actually cause a commit, and greeble #50 would later be inserted in @@ -84,82 +46,55 @@ already have been committed!. This is not a good thing. -
--Unorthodox use of variables. The standard mechanism for +
Unorthodox use of variables. The standard mechanism for mapping column values into variables involved the use of the set_variables_after_query routine, which relies on an uplevel variable named selection (likewise for set_variables_after_subquery and subselection). -
-Hard-coded reliance on Oracle. It's difficult to +
Hard-coded reliance on Oracle. It's difficult to write code supporting various different databases (dynamically using the appropriate dialect based on the type of database being used, e.g., using DECODE on Oracle and CASE ... WHEN on -Postgres).
+Postgres).
The Database Access API addresses the first three problems by: -
-making use of database handles transparent
wrapping common database operations (including transaction management) in -Tcl control structures (this is, after all, what Tcl is good at!)
+
making use of database handles transparent
wrapping common database operations (including transaction management) in +Tcl control structures (this is, after all, what Tcl is good at!)
It lays the groundwork for addressing the fourth problem by assigning each SQL statement a logical name. In a future version of the OpenACS Core, this API will translate logical statement names into actual SQL, based on the type of database in use. (To smooth the learning curve, we provide a facility for writing SQL inline for a "default SQL dialect", which we assume to be Oracle for now.) -
-To be clear, SQL abstraction is not fully implemented in OpenACS +
To be clear, SQL abstraction is not fully implemented in OpenACS 3.3.1. The statement names supplied to each call are not used by the API at all. The API's design for SQL abstraction is in fact incomplete; -unresolved issues include:
-how to add WHERE clause criteria dynamically
how to build a dynamic ORDER BY clause (Ben Adida has a -proposed solution for this)
how to define a statement's formal interface (i.e., what bind +unresolved issues include:
how to add WHERE clause criteria dynamically
how to build a dynamic ORDER BY clause (Ben Adida has a +proposed solution for this)
how to define a statement's formal interface (i.e., what bind variables it expects, what columns its SELECT clause must contain if it's a query) without actually implementing the statement in a -specific SQL dialect
+specific SQL dialect
So why is the incremental change of adding statement naming to the API worth the effort? It is worth the effort because we know that giving each SQL statement a logical name will be required by the complete SQL abstraction design. Therefore, we know that the effort will not be wasted, and taking advantage of the new support for bind variables will already require code that uses 3.3.0 version of the API to be updated. -
-set_variables_after_query is gone! (Well, it's still there, but you'll never need to use it.) The new API routines set local variables automatically. For instance: -
-+db_1row select_names "select first_names, last_name from users where user_id = [ad_get_user_id]" doc_body_append "Hello, $first_names $last_name!" --+
Like ns_db 1row, this will bomb if the query doesn't return any rows (no such user exists). If this isn't what you want, you can write: -
-+if { [db_0or1row select_names "select first_names, last_name from users where user_id = [ad_get_user_id]"] } { doc_body_append "Hello, $first_names $last_name!" @@ -168,44 +103,34 @@ doc_body_append "There's no such user!" } --+
Selecting a bunch of rows is a lot prettier now: -
-+db_foreach select_names "select first_names, last_name from users" { doc_body_append "Say hi to $first_names $last_name for me!<br>" } --+
That's right, db_foreach is now like ns_db select plus a while loop plus set_variables_after_query plus an if statement (containing code to be executed if no rows are returned). -
-
+
db_foreach select_names "select first_names, last_name from users where last_name like 'S%'" {
doc_body_append "Say hi to $first_names $last_name for me!<br>"
} if_no_rows {
doc_body_append "There aren't any users with last names beginnings with S!"
}
-
-The new API keeps track of which handles are in use, and automatically allocates new handles when they are necessary (e.g., to perform subqueries while a select is active). For example: -
-+doc_body_append "<ul>" db_foreach select_names "select first_names, last_name, user_id from users" { @@ -224,101 +149,79 @@ doc_body_append "</ul>" db_release_unused_handles --+
A new handle isn't actually allocated and released for every selection, of course - as a performance optimization, the API keeps old handles around until db_release_unused_handles is invoked (or the script terminates). -
-Note that there is no analogue to ns_db gethandle - the -handle is always automatically allocated the first time it's needed.
-Introduction
-+
Note that there is no analogue to ns_db gethandle - the +handle is always automatically allocated the first time it's needed.
Introduction
Most SQL statements require that the code invoking the statement pass along data associated with that statement, usually obtained from the user. For instance, in order to delete a WimpyPoint presentation, a Tcl script might use the SQL statement -
-+-delete from wp_presentations where presentation_id = some_presentation_id +delete from wp_presentations where presentation_id = some_presentation_id ---where some_presentation_id is a number which is a valid +
+where some_presentation_id is a number which is a valid presentation ID of the presentation I want to delete. It's easy to write code handling situations like this since SQL statements can include -bind variables, which represent placeholders for actual +bind variables, which represent placeholders for actual data. A bind variable is specified as a colon followed by an identifier, so the statement above can be coded as: -
-+db_dml presentation_delete { delete from wp_presentations where presentation_id = :some_presentation_id } --+
When this SQL statement is invoked, the value for the bind variable :some_presentation_id is pulled from the Tcl variable $some_presentation_id (in the caller's environment). Note that bind variables are not limited to one per statement; you can use an arbitrary number, and each will pull from the correspondingly named Tcl variable. (Alternatively, you can also specify an list or ns_set -providing bind variables' values; see Usage.) -
-The value of a bind variable is taken literally by the database driver, so +providing bind variables' values; see Usage.) +
The value of a bind variable is taken literally by the database driver, so there is never any need to put single-quotes around the value for a bind variable, or to use db_quote to escape single-quotes contained -in the value. The following works fine, despite the apostrophe:
-+in the value. The following works fine, despite the apostrophe:set exclamation "That's all, folks!" db_dml exclamation_insert { insert into exclamations(exclamation) values(:exclamation) } --Note that you can use a bind variable in a SQL statement only where you +
Note that you can use a bind variable in a SQL statement only where you could use a literal (a number or single-quoted string). Bind variables cannot be placeholders for things like SQL keywords, table names, or column names, so the following will not work, even if $table_name is set -properly:
-+properly:select * from :table_name --Why Bind Variables Are Useful
-+
Why Bind Variables Are Useful
Why bother with bind variables at all - why not just write the Tcl statement above like this: -
-+db_dml presentation_delete " delete from wp_presentations where presentation_id = $some_presentation_id " --+
(Note the use of double-quotes to allow the variable reference to $some_presentation_id to be interpolated in.) This will work, but consider the case where some devious user causes some_presentation_id to be set to something like '3 or 1 = 1', which would result in the following statement being executed: -
-+delete from wp_presentations where presentation_id = 3 or 1 = 1 --+
This deletes every presentation in the database! Using bind variables eliminates this gaping security hole: since bind variable values are taken literally. Oracle will attempt to delete presentations whose presentation ID @@ -328,24 +231,15 @@ always considers the values of bind variables to be literals, it becomes more difficult for users to perform URL surgery to trick scripts into running dangerous queries and DML. -
-Usage
-Every db_* command accepting a SQL command as an argument -supports bind variables. You can either
-specify the -bind switch to provide a set with bind variable -values, or
specify the -bind switch to explicitly provide a list of -bind variable names and values, or
not specify a bind variable list at all, in which case Tcl variables are -used as bind variables.
+
Usage
Every db_* command accepting a SQL command as an argument +supports bind variables. You can either
specify the -bind switch to provide a set with bind variable +values, or
specify the -bind switch to explicitly provide a list of +bind variable names and values, or
not specify a bind variable list at all, in which case Tcl variables are +used as bind variables.
The default behavior (i.e., if the -bind switch is omitted) is that these procedures expect to find local variables that correspond in name to the referenced bind variables, e.g.: -
-+set user_id 123456 set role "administrator" @@ -361,14 +255,11 @@ # of "administrator" } --+
The value of the local Tcl variable user_id (123456) is bound to the user_id bind variable. -
-The -bind switch can takes the name of an ns_set -containing keys for each bind variable named in the query, e.g.:
-+The -bind switch can takes the name of an ns_set +containing keys for each bind variable named in the query, e.g.:
set bind_vars [ns_set create] ns_set put $bind_vars user_id 123456 @@ -385,12 +276,10 @@ # of "administrator" } --+
Alternatively, as an argument to -bind you can specify a list of alternating name/value pairs for bind variables: -
-+db_foreach user_group_memberships_by_role { select g.group_id, g.group_name @@ -403,23 +292,18 @@ # of "administrator" } -- -+
When processing a DML statement, Oracle coerces empty strings into -null. (This coercion does not occur in the +null. (This coercion does not occur in the WHERE clause of a query, i.e. col = '' and col is null are not equivalent.) -
-As a result, when using bind variables, the only way to make Oracle set a +
As a result, when using bind variables, the only way to make Oracle set a column value to null is to set the corresponding bind variable to the empty string, since a bind variable whose value is the string "null" will be interpreted as the literal string -"null".
-These Oracle quirks complicate the process of writing clear and abstract -DML difficult. Here is an example that illustrates why:
-+"null".These Oracle quirks complicate the process of writing clear and abstract +DML difficult. Here is an example that illustrates why:
# # Given the table: @@ -439,19 +323,15 @@ # null, because Oracle has coerced the empty string (even for the # numeric column "bar") into null in both cases --+
Since databases other than Oracle do not coerce empty strings into null, this code has different semantics depending on the underlying database (i.e., the row that gets inserted may not have null as its column values), which defeats the purpose of SQL abstraction. -
-Therefore, the Database Access API provides a database-independent way to +
Therefore, the Database Access API provides a database-independent way to represent null (instead of the Oracle-specific idiom of the -empty string): db_null.
-Use it instead of the empty string whenever you want to set a column value -explicitly to null, e.g.:
-+empty string): db_null.Use it instead of the empty string whenever you want to set a column value +explicitly to null, e.g.:
set bar [db_null] set baz [db_null] @@ -460,35 +340,23 @@ # # sets the values for both the "bar" and "baz" columns to null --
We now require that each SQL statement be assigned a logical name for the statement that is unique to the procedure or page in which it is defined. This is so that (eventually) we can implement logically named statements with alternative SQL for non-Oracle databases (e.g., Postgres). More on this later. -
-Normally, db_foreach, db_0or1row, and db_1row places the results of queries in Tcl variables, so you can say: -
-+db_foreach users_select "select first_names, last_name from users" { doc_body_append "<li>$first_names $last_name\n" } --+
However, sometimes this is not sufficient: you may need to examine the rows returned, to dynamically determine the set of columns returned by the query, or to avoid collisions with existing variables. You can use the @@ -497,8 +365,7 @@ instruct the database routines to place the results in a Tcl array or ns_set, respectively, where the keys are the column names and the values are the column values. For example: -
-+db_foreach users_select "select first_names, last_name from users" -column_set columns { # Now $columns is an ns_set. @@ -508,282 +375,143 @@ } } --+
will write something like: -
-first_names is Jon. last_name is Salz.
first_names is Lars. last_name is Pind.
first_names is Michael. last_name is Yoon.
-The database library can transparently maintain pools of sequence values, so -that each request for a new sequence value (using db_nextval) -does not incur a roundtrip to the server. For instance, this functionality is -very useful in the security/sessions library, which very frequently allocates -values from the sec_id_seq sequence. To utilize this -functionality for a particular sequence, register the sequence to be pooled, -either using the db_register_pooled_sequence procedure at server -startup time, or by including a configuration parameter of the form -
-- -PoolSequence.sequence_name_seq=count - --
-in any configuration section in the yourservername.ini -file, e.g., e.g., -
-
-
-[ns/server/yourservername/acs/security]
-PoolSequence.sec_id_seq=20
-
-
--The database library will allocate this number of sequence values at server -startup. It will periodically scan pools and allocate new values for -sequences which are less than half-full. (This normally occurs every 60 -seconds, and is configurable via the -PooledSequenceUpdateInterval parameter in the -[ns/server/yourservername/acs/database] configuration -section.) -
-+
first_names is Jon. last_name is Salz.
first_names is Lars. last_name is Pind.
first_names is Michael. last_name is Yoon.
Note that you never have to use ns_db anymore (including ns_db gethandle)! Just start doing stuff, and (if you want) call db_release_unused_handles when you're done as a hint to release the database handle. -
-
-db_abort_transaction
-
-Aborts all levels of a transaction. That is if this is called within -several nested transactions, all of them are terminated. Use this insetead of -db_dml "abort" "abort transaction". +
-db_null
-
-Returns a value which can be used in a bind variable to represent the SQL +
+db_null
+Returns a value which can be used in a bind variable to represent the SQL value null. See Nulls and Bind Variables -above.
--db_foreach statement-name sql [ -bind bind_set_id | -bind bind_value_list ] \ - [ -column_array array_name | -column_set set_name ] \ - code_block [ if_no_rows if_no_rows_block ] --
Performs the SQL query sql, executing -code_block once for each row with variables set to +above.
+db_foreach statement-name sql [ -bind bind_set_id | -bind bind_value_list ] \ + [ -column_array array_name | -column_set set_name ] \ + code_block [ if_no_rows if_no_rows_block ] +
Performs the SQL query sql, executing +code_block once for each row with variables set to column values (or a set or array populated if -column_array or column_set is specified). If the query returns no rows, executes -if_no_rows_block (if provided).
-Example:
-+if_no_rows_block (if provided).Example:
db_foreach select_foo "select foo, bar from greeble" { doc_body_append "<li>foo=$foo; bar=$bar\n" } if_no_rows { doc_body_append "<li>There are no greebles in the database.\n" } --+
The code block may contain break statements (which terminate the loop and flush the database handle) and continue statements -(which continue to the next row of the loop).
--db_1row statement-name sql [ -bind bind_set_id | -bind bind_value_list ] \ - [ -column_array array_name | -column_set set_name ] --
Performs the SQL query sql, setting variables to -column values. Raises an error if the query does not return exactly 1 row.
-Example:
-+(which continue to the next row of the loop).
+db_1row statement-name sql [ -bind bind_set_id | -bind bind_value_list ] \ + [ -column_array array_name | -column_set set_name ] +
Performs the SQL query sql, setting variables to +column values. Raises an error if the query does not return exactly 1 row.
Example:
db_1row select_foo "select foo, bar from greeble where greeble_id = $greeble_id" # Bombs if there's no such greeble! # Now $foo and $bar are set. --
-db_0or1row statement-name sql [ -bind bind_set_id | -bind bind_value_list ] \ - [ -column_array array_name | -column_set set_name ] --
Performs the SQL query sql. If a row is returned, +
+db_0or1row statement-name sql [ -bind bind_set_id | -bind bind_value_list ] \ + [ -column_array array_name | -column_set set_name ] +
Performs the SQL query sql. If a row is returned, sets variables to column values and returns 1. If no rows are returned, -returns 0. If more than one row is returned, throws an error.
--db_nextval sequence-name --
Returns the next value for the sequence sequence-name (using a -SQL statement like SELECT sequence-name.nextval FROM -DUAL). If sequence pooling is enabled for the sequence, transparently -uses a value from the pool if available to save a round-trip to the database -(see Sequence Pooling). - -
--db_register_pooled_sequence sequence-name pool-size --
Registers the sequence sequence-name to be pooled, with a pool -size of pool-size sequence values (see Sequence Pooling). - -
--db_string statement-name sql [ -default default ] [ -bind bind_set_id | -bind bind_value_list ] --
Returns the first column of the result of SQL query -sql. If sql doesn't return a -row, returns default (or throws an error if -default is unspecified). Analogous to +returns 0. If more than one row is returned, throws an error.
+db_string statement-name sql [ -default default ] [ -bind bind_set_id | -bind bind_value_list ] +
Returns the first column of the result of SQL query +sql. If sql doesn't return a +row, returns default (or throws an error if +default is unspecified). Analogous to database_to_tcl_string and database_to_tcl_string_or_null. -
--db_list statement-name sql [ -bind bind_set_id | -bind bind_value_list ] --
Returns a Tcl list of the values in the first column of the result of SQL -query sql. If sql doesn't +
+db_nextval sequence-name +
Returns the next value for the sequence sequence-name (using a +SQL statement like SELECT sequence-name.nextval FROM +DUAL). If sequence pooling is enabled for the sequence, transparently +uses a value from the pool if available to save a round-trip to the database. + +
+db_list statement-name sql [ -bind bind_set_id | -bind bind_value_list ] +
Returns a Tcl list of the values in the first column of the result of SQL +query sql. If sql doesn't return any rows, returns an empty list. Analogous to database_to_tcl_list. -
--db_list_of_lists statement-name sql [ -bind bind_set_id | -bind bind_value_list ] --
Returns a Tcl list, each element of which is a list of all column values -in a row of the result of SQL query sql. If -sql doesn't return any rows, returns an empty list. +
+db_list_of_lists statement-name sql [ -bind bind_set_id | -bind bind_value_list ] +
Returns a Tcl list, each element of which is a list of all column values +in a row of the result of SQL query sql. If +sql doesn't return any rows, returns an empty list. (Analogous to database_to_tcl_list_list.) -
--db_dml statement-name sql \ - [ -bind bind_set_id | -bind bind_value_list ] \ - [ -blobs blob_list | -clobs clob_list | - -blob_files blob_file_list | -clob_files clob_file_list ] --
Performs the DML or DDL statement sql.
-If a length-n list of blobs or clobs is provided, then the SQL -should return n blobs or clobs into the bind variables -:1, :2, ... :n. -blobs or clobs, if specified, +
+db_list_of_ns_sets statement-name sql [ -bind bind_set_id | -bind bind_value_list ] +
+ Returns a list of ns_sets with the values of each column of each row + returned by the sql query specified. +
+db_dml statement-name sql \ + [ -bind bind_set_id | -bind bind_value_list ] \ + [ -blobs blob_list | -clobs clob_list | + -blob_files blob_file_list | -clob_files clob_file_list ] +
Performs the DML or DDL statement sql.
If a length-n list of blobs or clobs is provided, then the SQL +should return n blobs or clobs into the bind variables +:1, :2, ... :n. +blobs or clobs, if specified, should be a list of individual BLOBs or CLOBs to insert; -blob_files or clob_files, if -specified, should be a list of paths to files containing the data to +blob_files or clob_files, if +specified, should be a list of paths to files containing the data to insert. Only one of -blobs, -clobs, --blob_files, and -clob_files may be provided.
-Example:
-+-blob_files, and -clob_files may be provided.Example:
db_dml insert_photos " insert photos(photo_id, image, thumbnail_image) values(photo_id_seq.nextval, empty_blob(), empty_blob()) returning image, thumbnail_image into :1, :2 " -blob_files [list "/var/tmp/the_photo" "/var/tmp/the_thumbnail"] --+
This inserts a new row into the photos table, with the contents of the files /var/tmp/the_photo and /var/tmp/the_thumbnail in the image and thumbnail columns, respectively. -
--db_write_clob statement-name sql [ -bind bind_set_id | -bind bind_value_list ] +
+db_write_clob statement-name sql [ -bind bind_set_id | -bind bind_value_list ] -db_write_blob statement-name sql [ -bind bind_set_id | -bind bind_value_list ] +db_write_blob statement-name sql [ -bind bind_set_id | -bind bind_value_list ] -db_blob_get_file statement-name sql [ -bind bind_set_id | -bind bind_value_list ] --
Analagous to ns_ora write_clob/write_blob/blob_get_file. +db_blob_get_file statement-name sql [ -bind bind_set_id | -bind bind_value_list ] +
Analagous to ns_ora write_clob/write_blob/blob_get_file. -
-
-db_release_unused_handles
-
-Releases any allocated, unused database handles.
--db_transaction code_block [ on_error { code_block } ] --
Executes code_block transactionally. Nested +
+db_release_unused_handles
+Releases any allocated, unused database handles.
+db_transaction code_block [ on_error { code_block } ] +
Executes code_block transactionally. Nested transactions are supported (end transaction is transparently ns_db dml'ed when the outermost transaction completes). The db_abort_transaction command can be used to abort all levels of transactions. It is possible to specify an optional on_error -code block that will be executed if some code in code_block throws +code block that will be executed if some code in code_block throws an exception. The variable errmsg will be bound in that scope. -If there is no on_error code, any errors will be propagated.
-Example:
-+If there is no on_error code, any errors will be propagated.Example:
proc replace_the_foo { col } { db_transaction { @@ -812,30 +540,84 @@ print_the_foo ; # Writes out "foo is 8" --
-db_resultrows
-
-Returns the number of rows affected or returned by the previous +
+db_abort_transaction
+Aborts all levels of a transaction. That is if this is called within +several nested transactions, all of them are terminated. Use this insetead of +db_dml "abort" "abort transaction". + + +
+db_multirow [ -local ] [ -append ] [ -extend column_list ] \ + var-name statement-name sql \ + [ -bind bind_set_id | -bind bind_value_list ] \ + code_block [ if_no_rows if_no_rows_block ] +
+ Performs the SQL query sql, saving results in variables + of the form + var_name:1, var_name:2, etc, + setting var_name:rowcount to the total number + of rows, and setting var_name:columns to a + list of column names. +
+ Each row also has a column, rownum, automatically + added and set to the row number, starting with 1. Note that this will + override any column in the SQL statement named 'rownum', also if you're + using the Oracle rownum pseudo-column. +
+ If the -local is passed, the variables defined + by db_multirow will be set locally (useful if you're compiling dynamic templates + in a function or similar situations). +
+ You may supply a code block, which will be executed for each row in + the loop. This is very useful if you need to make computations that + are better done in Tcl than in SQL, for example using ns_urlencode + or ad_quotehtml, etc. When the Tcl code is executed, all the columns + from the SQL query will be set as local variables in that code. Any + changes made to these local variables will be copied back into the + multirow. +
+ You may also add additional, computed columns to the multirow, using the + -extend { col_1 col_2 ... } switch. This is + useful for things like constructing a URL for the object retrieved by + the query. +
+ If you're constructing your multirow through multiple queries with the + same set of columns, but with different rows, you can use the + -append switch. This causes the rows returned by this query + to be appended to the rows already in the multirow, instead of starting + a clean multirow, as is the normal behavior. The columns must match the + columns in the original multirow, or an error will be thrown. +
+ Your code block may call continue in order to skip a row + and not include it in the multirow. Or you can call break + to skip this row and quit looping. +
+ + Notice the nonstandard numbering (everything + else in Tcl starts at 0); the reason is that the graphics designer, a non + programmer, may wish to work with row numbers. +
+ Example: +
+db_multirow -extend { user_url } users users_query {
+ select user_id first_names, last_name, email from cc_users
+} {
+ set user_url [acs_community_member_url -user_id $user_id]
+}
+
+db_resultrows
+Returns the number of rows affected or returned by the previous statement. -
--db_with_handle var code_block --
Places a database handle into the variable var and -executes code_block. This is useful when you don't +
+db_with_handle var code_block +
Places a database handle into the variable var and +executes code_block. This is useful when you don't want to have to use the new API (db_foreach, -db_1row, etc.), but need to use database handles explicitly.
-Example:
-+db_1row, etc.), but need to use database handles explicitly.Example:
proc lookup_the_foo { foo } { db_with_handle db { @@ -853,71 +635,102 @@ } } --
-db_nullify_empty_string string --
For true SQL purists, we provide the convenience function -db_nullify_empty_string, which returns -[db_null] if its string argument is the empty string -and can be used to encapsulate another Oracle quirk:
-
-
-set baz ""
-
-# Clean out the foo table
-#
-db_dml unused "delete from foo"
-
-db_dml unused "insert into foo(baz) values('$baz')"
-
-set n_rows [db_string unused "select count(*) from foo where baz is null"]
-#
-# $n_rows is 1; in effect, the "baz is null" criterion is matching
-# the empty string we just inserted (because of Oracle's coercion
-# quirk)
-
-
--To balance out this asymmetry, you can explicitly set baz to -null by writing: -
-
-
-db_dml foo_insert "insert into foo(baz) values(:1)" {[db_nullify_empty_string $baz]}
-
-
-