Users will log in using a username, an authority, and a password. The authority is the source for user/password verification. OpenACS can be an authority itself.

Each user in OpenACS will belong to exactly one authority, which can either be the "local" OpenACS users table, in which case the password column is used, or it can be some external authority, which will be communicated with using some protocol, as implemented by an authentication driver.

Username will be separate from email address. It can be an email address, it can look like an email address but not be the name of an actual email mailbox, or it can be something else entirely.

We're assuming that user information (name, email, etc.) will either already be in the users table through a batch synchronization job, or that the relevant authentication implementation supports real-time synchronization of user data. Specifically, if you want remote users who haven't yet logged-in to OpenACS to show up in user searches, you'll have to do the batch synchronization.

All in all, the login box will be an includeable template and look like this:

Username:  ________
Password:  ________
Authority: [URZ   ]
            Athena
            Local

[Forgot my password]
[New user registration]

If there's only one active authority, we don't display the authority drop-down element at all.

The site-wide systems administrator can configure the authentication process from a page linked under /acs-admin.

The local authority driver is an encapsulation of current functionality within a driver matching a service contract. The other drivers call external functions. The possible functions for each authority are split into several drivers for convenience. One driver handles authentication, one account creation, and one changing passwords.

Each authority is defined like this:

Each authority driver will have a set of configuration options dependent on the driver, such as host, port, etc. We will need to find a mechanism for the driver to tell us which configuration options are available, a way to set these, and a way for the driver to access these settings.

OpenACS will come pre-configured with one authority, which is the "local" authority, meaning we'll authenticate as normal using the local users table. This will, just like any other authority, be implemetned using a service contract.

Regardless of the login method, the user needs to have a row in the OpenACS users table. This can happen through a batch job, in real-time, or both in combination. We use the IMS Enterprise 1.1 specification.

Batch job means that we do a synchronization (import new users, modify changed, purge deleted) on a regular interval, e.g. every night. You can also decide to have a monthly full synchronization, plus daily incremental ones. That's up to you. The advantage is that you have all users in OpenACS, so when you search for a user, you'll see all the organization's users, not just those who happen to have used the OpenACS-based system. The down-side is that it takes some time for user information to propagate. This can be remedied by using the real-time solution. The batch job will also require error logging and an admin interface to view logs.

If an email already belongs to some other user, we log it as an error.

A user will always belong to exactly one authority, which can be either the "local" authority or some other. Thus, the OpenACS user's table will have to be augmented with the following columns:

Real-time means that the first time the user logs into OpenACS, we'll query the authority that authenticated him for information about this user. That authentication authority will then give us at least first names, last name and email. The pros and cons are the opposite of batch jobs. Using both in combination is ideal.

Note: One solution to the "two users from different authorities have the same email" problem above would be to allow users to belong to multiple authorities. Then we would notice that the email already exists, ask the user if he thinks he's the same person, and if so, ask him to prove so by authenticating using the other authority. Thus he'll have just authenticated in two different authorities, and we can record that this is the same person. We'd still have a problem if there was an email conflict between two accounts on the same authority. Hm. I don't think it's worth spending too much time trying to solve this problem through software.

After having authenticated using the relevant authority driver, we'll look for the username/authority pair in the users table.

If we don't find any, that means that we're either not doing batch synchronizing, or that the user has been added since the last sync. In that case, we'll try to do a real-time synchronization, if the driver supports it. If it does, it'll return email, first_names, last_name, and other relevant information, and we'll create a row in the local users table using that information.

If that doesn't work, we'll tell the user that their account isn't yet available, and the driver will supply a message for us, which could say "The account should be available tomorrow. If not, contact X."

If a user doesn't have an account, the site-wide configuration can allow the user to register for one, as defined in the configuration discussed above. This section is about normal account registration through an authority driver.

The account creation service contract implementation will need to tell us which information to ask the user for:

The fields to choose from are these:

It should return the following:

After creating the remote account, a local account is created with the information gathered through the form/returned by the driver.

By default, a local account creation implementation is provided, which will create a new OpenACS user, and, in addition to the default local account creation above, also store the password in hashed form.

Password management is about changing password, retrieving password, and resetting password.

It's up to the authority driver implementation to decide whether to support any or all of these features, and to say so using the CanXXX methods (see driver API below).

Additionally, the authority can be configured with a URL to redirect to in the case of forgotten passwords, or when the user desires to change password.

Login pages must be able to be sent over a secure connection (https), so your password won't get sent over the wire in cleartext, while leaving the rest of the site non-secure (http). I believe that this requires some (minor) changes to the current session handling code.

Email verification needs to be handled both at registration and at login.

In both cases, it'll be handled by the driver sending automatically sending the email containing a link for the user to verify his account. Then the driver will return an account status of "closed,temporary", and a message that says "Check your inbox and click the link in the email".

OpenACS will have a page which receives the email verification, for use by local accounts. Other authorities will have to implement their own page, most likely on the authority's own server.

I like the idea of having multiple login levels:

There are two advantages to this. First, when people's login expires, we can ask them to re-enter only their password, and not both username and password, since we'll still remember who they were the last time their login was valid. This is a much faster operation (the password input field will be focused by default, so you just type your password and hit Return) that typing both username and password, which will make it practical to have your site configured to expire people's login after e.g. 2, 4, or 8 hours.

The other advantage is that we can still offer certain functionality to you, even when your login is not trusted. For example, we could let you browse publicly available forums, and only when you want to post do you need to log in. This makes it even more feasible to have a more secure login expiration setting.

By default, auth::require_login would bounce to the login page if the user is only logged-in at the untrusted level. Only if you explicitly say auth::require_login -untrusted will we give you the user_id of a user who's only logged-in in untrusted mode.

Similarly, ad_conn user_id will continue to return 0 (not logged-in) when the user is only logged-in untrusted, and we'll supply another variable, ad_conn untrusted_user_id, which wlll be set to the user_id for all login levels.

This should ensure that we get full access to the new feature, while leaving all current code just as secure as it was before.

Currently, OpenACS is unusable in practice without persistent login. The login will expire after just a few minutes of inactivity, and you'll get bounced to the login page where you have to enter both email and password again. Unacceptable in practice.

We should change the default, so a non-persistent login doesn't expire until you either close your browser, or a few hours have elapsed. Even if you are constantly active, the login should still expire after at most x number of hours. We can still make the login expire after a period of inactivity, but the amount of time should be configurable and default to something reasonable like an hour or so.

This will require looking into and changing the design of the current session handling code.

Instead of redirecting to the login page, auth::require_login can redirect to an authentication server, which can redirect back to a page that logs the user in. This should be very easy to implement.

Alternatively, if you want to combine this with fallback to OpenACS accounts, we would instead present the normal login screen, but put a button which says "Login using X", where X is the redirection-based external authority.

Currently, if you've ever left a permanent login cookie on someone elses machine, that person will be forever logged-in until he/she explicitly logs out. You can change your password, you can do anything you want, but unless a logout is requested from that particular browser, that browser will be logged-in forever.

I want to change our session handling code so that old login cookies can be expired. This would be done automatically whenever you change your password, and we could also offer a link which does this without changing passwords. It's an important security measure.

The implementation is simply to autogenerate some secret token which is stored in the users table, and is also stored in the cookie somehow. Then, whenever we want to expire all logins, we'll just regenerate a new secret token, and the other cookies will be void. Of course, we don't want to incur a DB hit on every request, so we'll need to cache the secret token, or only check it when refreshing the session cookie, which, I believe, normally happens every 10 minutes or so.

As an additional security measure, we should email the account's email address whenever the password is changed, so that he/she is at least alerted to the fact.

Again, to increase security, we should add password policies, such as passwords needing to be changed after a certain number of days, change on next login (after a new random password has been generated), or requiring that the password satisfies certain complexity rules, i.e. both upper and lowercase characters, numbers, special chars, etc.

It would good to extend the current maximum password length from 10 to at least 32 characters.

In order to make it easier for people, we've been toying with the idea of a functionality like this:

If this is deemed desirable, a way to implement this would be through these settings:

The relevant code in user-login.tcl would look like this:

if { ![auth::split_username -username_var username -authority_var authority] } {
    # bounce back to the form with a message saying that the login was not valid. 
    ad_script_abort
}

# username will now contain username
# authority will now contain authority

While we're touching the session handling code, anyway, it would be nice to add a feature to show who's currently online, a nice real-time collaboration feature frequently requested by members of the community. This is particularly interesting when integrated with a chat or instant messaging service like Jabber.

What I'm concretely suggesting is that we keep a record of which authenticated users have requested pages on the site in the last x minutes (typically about 5), and thus are considered to be currently online. There's nothing more to it. This lets us display a list of "active users" somewhere on the site, and make their name a link to a real-time chat service like Jabber.

We've already made the changes necessary to security-procs.tcl to do this on an earlier project, but haven't quite finished the work and put it back into the tree.

If we want to, we could let subsite administrators configure the login process for that particular subsite. This would probably only entail letting the subsite admin leave out certain authorities defined site-wide, and change the sort order.

I think we should leave this out until we have a use case for it, someone who'd need it.

For completely free-form authentication logic and mechanisms, something like Andrew Grumet's Pluggable Authentication for OACS Draft is interesting. He's proposing a scheme where the entire user interaction is encapsulated in, and left entirely to, a service contract. This certainly opens up more advanced possibilities, such as perhaps smart cards, personal certificates, etc.

I have chosen not to go this route, because I think that most people are going to want to use a username/password-based scheme, and having easy configuration through a web UI is more important than total flexibility at this point.

Besides, we can always do this in the future, by letting the public Authentication API (auth::require_login and auth::authenticate) be implemented through a service contract.

Both OKI and OpenACS supports a form of stacking, where you can be logged into multiple authorities at the same time. This is useful if, for example, you need to get login tokens such as Kerberos tickets for access to shared resources.

I can see the value in this, but for simplicity's sake, I'm in favor of keeping this use-case out of the loop until we have someone with a real requirement who could help us guide development.

For now, OpenACS is still more of an integrated suite, it doesn't access many outside applications. I think it would be excellent for OpenACS to do so, e.g. by using an IMAP server to store emails, an iCal server to store calendar appointments, LDAP for user/group data and access control lists, SMB for file storage, etc. But at the moment, we don't have any users of such things that are ready. We have some who are on the steps, but let's wait till they're there.

We'll need drivers for: