| Prev | Appendix B. Install additional supporting software | Next |
|---|
We recommend the use of AOLserver 4.0.1 or later. These instructions are retained as a resource.
+
by Vinod Kurup
+ </authorblurb> + +We recommend the use of AOLserver 4.0.1 or later. These instructions are retained as a resource.
+Debian users: we do not recommend installing Debian packages for Aolserver or Postgres. Several people have reported problems while trying to install using apt-get instead of from source. If you have the time to debug these and submit what you did, that's great, but if not, you should stick to installing from source. -
Unpack the Aolserver tarball. Download the aolserver tarball and unpack it.
[root root]#cd /usr/local/src+ + +
- +
+ Unpack the Aolserver tarball. + Download the aolserver tarball and unpack it. +
+[root root]#cd /usr/local/src[root src]#wget --passive http://uptime.openacs.org/aolserver-openacs/aolserver3.3oacs1.tar.gz--15:38:08-- http://uptime.openacs.org/aolserver-openacs/aolserver3.3oacs1.tar.gz => `aolserver3.3oacs1.tar.gz' @@ -23,16 +35,24 @@ 15:39:05 (66.56 KB/s) - `aolserver3.3oacs1.tar.gz' saved [3858074/3858074] [root src]#tar xzf aolserver3.3oacs1.tar.gz[root src]# -cd /usr/local/src +cd /usr/local/src wget --passive http://uptime.openacs.org/aolserver-openacs/aolserver3.3oacs1.tar.gz -tar xzf aolserver3.3oacs1.tar.gzThis section also relies on some OpenACS files, which you can get with the section called “Unpack the OpenACS tarball”.
Compile AOLserver. Compile and install AOLserver. First, prepare the installation directory and the source code. The message about BUILD-MODULES can be ignored.
root@yourserver root]#+mkdir -p /usr/local/aolserver+tar xzf aolserver3.3oacs1.tar.gzThis section also relies on some OpenACS files, which you can get with the section called “Unpack the OpenACS tarball”.
+- +
+ Compile AOLserver. + Compile and install AOLserver. First, prepare the installation directory and the source code. The message about BUILD-MODULES can be ignored. +
+root@yourserver root]#mkdir -p /usr/local/aolserver[root root]#cd /usr/local/src/aolserver[root aolserver]#./conf-cleancat: BUILD-MODULES: No such file or directory Done. -[root aolserver]#mkdir -p /usr/local/aolserver +[root aolserver]#mkdir -p /usr/local/aolserver cd /usr/local/src/aolserver -./conf-clean+./conf-clean +
If you are using Oracle, edit
conf-dband changepostgresqlto @@ -41,21 +61,29 @@ installed. In order to get nsoracle to compile, you may need to su - oracle, and then su (without the -) root to set the environment variables properly. -+ +
conf-instshould contain the +
conf-instshould contain the location where AOLserver is to be installed. Overwrite the - tarball's default value with our default value,/usr/local/aolserver:[root aolserver]#echo "/usr/local/aolserver" > conf-inst-[root aolserver]#+
conf-makeshould contain the + tarball's default value with our default value,/usr/local/aolserver:[root aolserver]#+ +echo "/usr/local/aolserver" > conf-inst+[root aolserver]#
conf-makeshould contain the name of the GNU Make command on your system. It defaults to -gmake. Debian users:.ln -s /usr/bin/make /usr/bin/gmakeSet an environment variable that the nspostgres driver +
+gmake. Debian users:.ln -s /usr/bin/make /usr/bin/gmakeSet an environment variable that the nspostgres driver Makefile needs to compile correctly and run
conf, which compiles AOLserver, the default modules, and the database driver, and - installs them.Debian users, see + installs them.
+Debian users, see warning above, but if you do use apt-get for AOLserver 3.3+ad13 and postgresql from apt-get may need to make these symlinks:
ln -s /usr/include/postgresql/ /usr/include/pgsql- andln -s /usr/lib/postgresql /usr/local/pgsql)[root aolserver]#export POSTGRES=/usr/local/pgsql; ./conf+ andln -s /usr/lib/postgresql /usr/local/pgsql) +[root aolserver]#export POSTGRES=/usr/local/pgsql; ./confBuilding in /usr/local/aolserver with the following modules: AOLserver @@ -76,27 +104,47 @@ Creating ... ================================================================== Done Building Sat Mar 8 10:31:35 PST 2003 -[root aolserver]#- This takes about 5 minutes. It builds aolserver, several modules, and the database driver. (Upgraders, note that the postgres database driver has changed from postgres.so to nspostgres.so). All of the results are logged to files in
/usr/local/src/aolserver/log. If you run into problems running AOLserver, check these files for build errors.Add a database-specific wrapper script. This script +[root aolserver]# + +
+ This takes about 5 minutes. It builds aolserver, several modules, and the database driver. (Upgraders, note that the postgres database driver has changed from postgres.so to nspostgres.so). All of the results are logged to files in
+/usr/local/src/aolserver/log. If you run into problems running AOLserver, check these files for build errors.- +
+ Add a database-specific wrapper script. +This script sets database environment variables before starting AOLserver; this allows the AOLserver instance can communicate with the database. There is one script each for Oracle and PostgreSQL. They don't conflict, so if you plan - to use both databases, install both.
+
Oracle
[root aolserver]#cd /usr/local/aolserver/bin+ to use both databases, install both. + +
- +
Oracle
+[root aolserver]#cd /usr/local/aolserver/bin[root bin]#cp /var/tmp/openacs-5.9.0/packages/acs-core-docs/www/files/nsd-oracle.txt ./nsd-oracle[root bin]#chmod 750 nsd-oracle[root bin]# -cd /usr/local/aolserver/bin +cd /usr/local/aolserver/bin cp /var/tmp/openacs-5.9.0/packages/acs-core-docs/www/files/nsd-oracle.txt ./nsd-oracle -chmod 750 nsd-oraclePostgreSQL
[root aolserver]#+cd /usr/local/aolserver/bin+chmod 750 nsd-oracle- +
PostgreSQL
+[root aolserver]#cd /usr/local/aolserver/bin[root bin]#cp /var/tmp/openacs-5.9.0/packages/acs-core-docs/www/files/nsd-postgres.txt ./nsd-postgres[root bin]#chmod 755 nsd-postgres[root bin]# -cd /usr/local/aolserver/bin +cd /usr/local/aolserver/bin cp /var/tmp/openacs-5.9.0/packages/acs-core-docs/www/files/nsd-postgres.txt ./nsd-postgres -chmod 755 nsd-postgresInstall tDOM. Download the tDOM +chmod 755 nsd-postgres +
- +
+ Install tDOM. + Download the tDOM tarball, unpack it, adjust the configuration file to match our patched - distribution of aolserver, and compile it.
[root root]#cd /usr/local/src+ distribution of aolserver, and compile it. + +[root root]#cd /usr/local/src[root src]#wget --passive http://www.tdom.org/tDOM-0.7.8.tar.gz--16:40:58-- http://www.tdom.org/tDOM-0.7.8.tar.gz => `tDOM-0.7.8.tar.gz' @@ -112,18 +160,24 @@ [root src]#tar xzf tDOM-0.7.8.tar.gz[root src]#cd tDOM-0.7.8/unix[root unix]# -cd /usr/local/src +cd /usr/local/src wget --passive http://www.tdom.org/tDOM-0.7.8.tar.gz tar xzf tDOM-0.7.8.tar.gz -cd tDOM-0.7.8/unixEdit the file CONFIG and change this section:
# ---------------------------------------------------- +cd tDOM-0.7.8/unix+Edit the file CONFIG and change this section:
+# ---------------------------------------------------- # aolsrc="/usr/src/aolserver-3.4" # ../configure --enable-threads --disable-tdomalloc \ # --with-aolserver=$aolsrc \ -# --with-tcl=$aolsrc/tcl8.3.4/unixto
# ---------------------------------------------------- +# --with-tcl=$aolsrc/tcl8.3.4/unix+to
+# ---------------------------------------------------- aolsrc="/usr/local/src/aolserver/aolserver" ../configure --enable-threads --disable-tdomalloc \ --with-aolserver=$aolsrc \ - --with-tcl=$aolsrc/tcl8.3.2/unixAnd configure and compile:
[root unix]#+sh CONFIG+ --with-tcl=$aolsrc/tcl8.3.2/unixAnd configure and compile:
+[root unix]#sh CONFIGcreating cache ./config.cache checking for memmove... yes (many lines omitted) @@ -140,20 +194,32 @@ [root bin]#ln -s libtdom0.7.8.so libtdom.so[root bin]# -sh CONFIG +sh CONFIG make cp libtdom0.7.8.so /usr/local/aolserver/bin/ cd /usr/local/aolserver/bin -ln -s libtdom0.7.8.so libtdom.soInstall nsopenssl - (OPTIONAL)
Install Full Text Search with OpenFTS (OPTIONAL)
Install nspam (OPTIONAL)
Test AOLserver. In order to test AOLserver, we'll run it using the +ln -s libtdom0.7.8.so libtdom.so +
- +
Install nsopenssl + (OPTIONAL)
+- +
Install Full Text Search with OpenFTS (OPTIONAL)
+- +
Install nspam (OPTIONAL)
+- +
+ Test AOLserver. + In order to test AOLserver, we'll run it using the sample-config.tcl file provided in the AOLserver distribution, under the nobody user and
webgroup. The sample-config.tcl configuration writes to the default log locations, so we need to give it permission to do so or it will fail. Grant thewebgroup permission to write to/usr/local/aolserver/logand -/usr/local/aolserver/servers.[root root]#+ +cd /usr/local/aolserver+/usr/local/aolserver/servers. + +[root root]#cd /usr/local/aolserver[root aolserver]#chown -R root.web log servers[root aolserver]#chmod -R g+w log servers[root aolserver]#ls -l@@ -166,24 +232,33 @@ -rw-r--r-- 1 root root 7320 Mar 31 2001 sample-config.tcl drwxrwsr-x 3 root web 4096 Mar 8 10:31 servers [root aolserver]# - + cd /usr/local/aolserver chown -R root.web log servers chmod -R g+w log servers -ls -lNote: AOLserver4.x does not include a default start page, so we create one for this test. Type +ls -l
Note: AOLserver4.x does not include a default start page, so we create one for this test. Type
echo "Welcome to AOLserver" > /usr/local/aolserver40r8/servers/server1/pages/index.html-Now, we'll run a quick test to ensure AOLserver is running +
+Now, we'll run a quick test to ensure AOLserver is running correctly. We'll use the sample config file provided with AOLserver. This file will attempt to guess your IP address and hostname. It will then start up the server at port 8000 of that - IP address.
[root aolserver]#+./bin/nsd -t sample-config.tcl -u nobody -g web+ IP address. + +[root aolserver]#./bin/nsd -t sample-config.tcl -u nobody -g web[root aolserver]# [08/Mar/2003:15:07:18][31175.8192][-main-] Notice: config.tcl: starting to read config file... [08/Mar/2003:15:07:18][31175.8192][-main-] Warning: config.tcl: nsssl not loaded -- key/cert files do not exist. [08/Mar/2003:15:07:18][31175.8192][-main-] Warning: config.tcl: nscp not loaded -- user/password is not set. [08/Mar/2003:15:07:18][31175.8192][-main-] Notice: config.tcl: finished reading -config file.The first warning, about nsssl, can be ignored. We won't be using nsssl; we'll be using nsopenssl instead, and we haven't fully configured it yet. The nscp warning refers to the fact that, without a user and password in the config file, the administrative panel of AOLserver won't load. We don't plan to use it and can ignore that error as well. Any other warning or error is unexpected and probably a problem.
+config file.
The first warning, about nsssl, can be ignored. We won't be using nsssl; we'll be using nsopenssl instead, and we haven't fully configured it yet. The nscp warning refers to the fact that, without a user and password in the config file, the administrative panel of AOLserver won't load. We don't plan to use it and can ignore that error as well. Any other warning or error is unexpected and probably a problem.
+ ++ Test to see if AOLserver is working by starting
MozillaorLynxon the same @@ -192,53 +267,86 @@ didn't guess your hostname or ip correctly, you'll get a false negative test. -[root aolserver]#lynx localhost:8000+
+[root aolserver]#+ +lynx localhost:8000+ You should see a "Welcome to AOLserver" page. If this doesn't work, try going to
http://127.0.0.1:8000/. If this still doesn't work, check out the Troubleshooting AOLserver section below. Note that you will not be able to browse to the web page from another machine, because AOLserver is only listening to the local address. -Shutdown the test server:
[root aolserver]#killall nsd-[root aolserver]#+
+Shutdown the test server:
+[root aolserver]#+ +killall nsd+[root aolserver]#+ The
killallcommand will kill all processes with the namensd, but clearly this is not a good tool to use for managing your services in general. We cover this topic in the Keep AOLserver alive section. -Troubleshooting. If you can't view the welcome page, it's likely there's a +
+- +
+ Troubleshooting. + If you can't view the welcome page, it's likely there's a problem with your server configuration. Start by viewing your AOLserver log, which is in
/usr/local/aolserver/log/server.log. You should also try to find lines of the form: -+ + ++[01/Jun/2000:12:11:20][5914.4051][-nssock-] Notice: nssock: listening on http://localhost.localdomain:8000 (127.0.0.1:8000) -[01/Jun/2000:12:11:20][5914.4051][-nssock-] Notice: accepting connections+[01/Jun/2000:12:11:20][5914.4051][-nssock-] Notice: accepting connections
+ If you can find these lines, try entering the URL the server is listening on. If you cannot find these lines, there must be an error somewhere in the file. Search for lines beginning with the word
Errorinstead ofNotice. -+
++ The
sample-config.tclfile grabs your address and hostname from your OS settings. -+ + ++set hostname [ns_info hostname] -set address [ns_info address]+set address [ns_info address]
+ If you get an error that nssock can't get the requested address, you can set these manually. If you type 0.0.0.0, AOLserver will try to listen on all available addresses. Note:
ns_info addressdoesn't appear to be supported in current versions of AOLserver. -+ + +set hostname [ns_info hostname] #set address [ns_info address] -set address 0.0.0.0Install - Analog web file analyzer. (OPTIONAL)
($Id$)
Install + Analog web file analyzer. (OPTIONAL)
+($Id$)
+ +